DIY Chicken Feeder Rain Proof Poultry Feeder Port Gravity Feed Kit for Buckets, Barrels, Bins, Troughs

DIY Chicken Feeder: A Comprehensive Guide to Building a Rain-Proof Poultry Feeder Port Gravity Feed Kit for Buckets, Barrels, Bins, and Troughs

Introduction

Raising backyard chickens has become increasingly popular among urban and suburban dwellers who want to enjoy fresh eggs and experience the satisfaction of caring for their own poultry. One of the main challenges faced by chicken owners is providing a consistent and clean supply of food for their flock. A well-designed chicken feeder can help to address this problem. In this comprehensive guide, we will discuss how to build a DIY rainproof chicken feeder that uses a gravity feed system for buckets, barrels, bins, and troughs.

Materials and Tools

To build your DIY rainproof chicken feeder, you will need the following materials and tools:

1. A suitable container: Choose a bucket, barrel, bin, or trough that has a suitable capacity to hold the feed for your flock. The container should be made of sturdy, non-toxic, and weather-resistant material.
2. Poultry feeder ports: These specialized feeding ports are designed to dispense feed when chickens peck at them, reducing waste and keeping the feed clean and dry.
3. PVC pipes and fittings: You will need PVC pipes and fittings to connect the poultry feeder ports to the container.
4. Waterproof sealant: This will be used to ensure that the feeder remains watertight, preventing rainwater from seeping into the feed.
5. Drill with hole saw attachment: This tool will be used to create holes for the poultry feeder ports.
6. Tape measure and marker: These will be used to mark the locations of the holes and ensure proper spacing.

Building the DIY Rainproof Chicken Feeder

Step 1: Choose the location for the feeder ports

Determine the optimal height for the feeder ports by measuring the height of your chickens from the ground to their back. The ports should be slightly higher than this measurement to prevent the chickens from standing in the feed and contaminating it.

Step 2: Mark the hole locations

Use the tape measure and marker to mark the locations of the holes for the feeder ports on the container. Space the ports evenly around the container, allowing adequate room for multiple chickens to feed simultaneously.

Step 3: Drill the holes

Using the drill with the hole saw attachment, carefully drill the holes for the feeder ports at the marked locations. Ensure that the holes are the correct size for the poultry feeder ports to fit snugly.

Step 4: Install the feeder ports

Insert the poultry feeder ports into the drilled holes and secure them in place according to the manufacturer’s instructions. Make sure that the ports are installed correctly, with the dispensing mechanism facing downward.

Step 5: Connect the PVC pipes

Cut the PVC pipes to the appropriate length and attach them to the feeder ports using the PVC fittings. Ensure that the pipes are connected securely and that there are no gaps or leaks.

Step 6: Apply waterproof sealant

Apply the waterproof sealant around the edges of the feeder ports and the PVC pipe connections to ensure that the feeder remains watertight. Allow the sealant to dry completely before filling the feeder with feed.

Step 7: Fill the container with feed

Fill the container with your preferred poultry feed, making sure not to overfill it. The gravity feed system will ensure that the feed is consistently available to your chickens as they peck at the feeder ports.

Conclusion

A DIY rainproof chicken feeder with a gravity feed system for buckets, barrels, bins, and troughs can help to ensure that your backyard chickens have access to a consistent and clean supply